ADTRAN 5000 Series debug ip pim-sparse joinprune [event

Command Reference Guide Enable Mode Command Set

debug ip pim-sparse joinprune [event | state] <address>

Use the debug ip pim-sparse joinprune command to display protocol-independent m ulticast (PIM)

sparse mode join and prune transactions. Debug messages are displayed (real time) to the terminal (or

Telnet) screen. Use the no form of this command to disable debug messages.

Syntax Description

event Displays PIM sparse joi n and prune events.

state Displays PIM sparse join and prune state chan ges.

<address> Specifies group address to filter.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 2000, 5000, and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example activates PIM sparse mode messages for all join and prune events and state

changes:

>enable

#debug ip pim-sparse joinprune