ADTRAN 5000 Series ip local policy route-map <map-name>

Command Reference Guide Global Configuration Mode Command Set

ip local policy route-map <map-name>

Use this command to specify a route-map for local policy routing on the device. This setting is applied to

the local network interface. Use the no form of this command to return to the default route-map.

Syntax Description

<map-name> Specify the name of the route- map.

Default Values

By default, this command is disabled.

Applicable Platforms

This command applies to the NetVanta 2000 and 5000 and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Functional Notes

Before a route map can be specifie d, it must first be defined using the route-map command. See

route-map <map-name> [ permit | deny ] <sequence number> on page 439 for more information.

Usage Examples

The following example specifies a route-map entitled myMap for local policy routing:

(config)#ip local policy route-map myMap