ADTRAN 5000 Series - page 918

Command Reference Guide PPP Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 918
hold-queue <queue size> out
Use the hold-queue out command to change the overall size of an interfa ce's WAN output queue.
Syntax Description
<queue size> S pecifies the tot al number of packets th e output queue can contain before packets
are dropped . Ra ng e 16 to 10 00 .
Default Values
The default queue size for WFQ is 400. The default queue size for PPP FIFO and Frame Relay
round-robin is 200.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900
Series units.
Command History
Release 5.1 Command was introduced.
Usage Examples
The following example sets the overall output queue size to 700:
(config)#interface ppp 1
(config-ppp 1)#hold-queue 700 out