Command Reference Guide Router (RIP) Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1134

ROUTER (RIP) CONFIGURATION COMMAND SET

To activate the Router (RIP) Configuration mode, enter the router rip command at the Global
Configuration mode prompt. For example:
>enable
#
configure terminal
(config)#
router rip
(config-rip)#
The following comm a nd s are com mo n to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
cross-connect <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port>
on page 28
do on page 32
end on page 33
exit on page 34
All other commands for this command set are described in this section in alphabetical order.
auto-summary on page 1135
timeout-timer <seconds> on page 1142
network <address> <subnet mask> on page 1137
passive-interface <interface> on page 1138
redistribute connected [metric <value>] on page 1139
redistribute ospf [metric <value>] on page 1140
redistribute static [metric <value>] on page 1141
timeout-timer <seconds> on page 1142
update-timer <seconds> on page 1143
version [1 | 2] on page 1144