ADTRAN 5000 Series line-length [short

Command Reference Guide T3 Interface Configuration Command Set

line-length [short | long]

Use the line-length command to configure the line length for a T3 physical interface.

Syntax Description

short Configures the line length for a distance of 0 to 225 feet of cable.

long Configures the line length for a distance of 225 to 450 feet of cable.

Default Value

By default, all T3 interfaces are configured for a short line length.

Applicable Platforms

This command applies to the NetVanta 5000 Series.

Command History

Release 6.1 Command was introduced.

Usage Examples

The following example configures the T3 interface for long line length:

(config)#interface t3 1/1

(config-t3 1/1)#line-lengt h lo ng