ADTRAN 5000 Series ip firewall alg sip udp <port#>

Command Reference Guide Global Configuration Mode Command Set

ip firewall alg sip udp <port#>

Use the ip firewall alg sip udp command to configure the user datagram protocol (UDP) port for Session

Initiation Protocol (SIP) application-level gateways (ALG). Use the no form of this command to return to

the default settings.

Syntax Description

udp <port#> Sets the UDP port. Valid range: 1 to 65,535.

Default Values

By default, the ALG for SIP is enabled and the UDP port is set to 5060.

Applicable Platforms

This command applies to the NetVanta 2000 and 5000 and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example enables port 1020 for UDP:

(config)#ip firewall alg sip udp 1020