ADTRAN 5000 Series show sip location [dynamic

Command Reference Guide Enable Mode Command Set

show sip location [dynamic | static]

Use the show sip location command to display Session Initiation Protocol (SIP) statistical and registration

information.

Syntax Description

dynamic Displays SIP location database dynamic entries.

static Displays SIP location dat abase static entries.

Default Values

No default necessary for this command.

Applicable Platforms

This command applies to the Total Access 2000 and 5000 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example shows sample output from the show sip lo ca t i o n static command:

>enable

#show sip location static

User IP Address Port Expires Source

----------------------------------------------------------------------------------------------

Test 10.1.1.1 5060 0 User Config