ADTRAN 5000 Series

Command Reference Guide PPP Interface Configuration Command Set

ip pim-sparse nbr-timeout <time>

Use the ip pim-sparse nbr-timeout command to specify protocol-independent multicast (PIM) sparse

neighbor timeout. This is the time interval after which a PIM-capable router will consider a neighbor not

present. Use the no form of this command to return to the default value.

Syntax Description

<time> Specifies the time interval in seconds after which a neighbor is considered not

present. Valid range is 30 to 10,800 seconds.

Default Values

By default, the nbr-timeout is set to 105 seconds.

Applicable Platforms

This command applies to the NetVanta 2000 and 5000 and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example sets the nbr-timeout to 300 seconds:

(config)#interface ppp 1

(config-ppp 1)#ip pim-sparse nbr-timeout 300