Command Reference Guide Crypto Map Manual Command Set
61200990L1-35E Copyright © 2005 ADTRAN 1055
match address <listname>
Use the match address command to assign an IP access list to a crypto map definition. The access list
designates the IP packets to be encrypted by this crypto map. See ip access-list extended <listname> on
page 344 for more information on creating access lists.
Syntax Description
<listname> Specifies the name of the access list you wish to assign to this crypto map.
Default Values
By default, no IP access lists are de fined.
Applicable Platforms
This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 Series units.
Command History
Release 4.1 Command was introduced.
Functional Notes
Crypto map entries do not directly contain the selectors used to determine which data to secure. Instead,
the crypto map entry refers to an access control list. An access control list (ACL) is assigned to the crypto
map using the match a ddress command (see crypto map on page 331) with the NetVanta 2000 and 3000
Series units. If no ACL is configured for a crypto map, then the entry is incomplete and will have no effect
on the system.
The entries of the ACL used in a crypto map should be created with respect to tr affic sent by the ADTRAN
product. The so urce infor ma tion mu st b e the local ADTRAN product, and the de stination must be th e pee r.
Only extended access lists can be used in crypto maps.