ADTRAN 5000 Series set interface <interface type> <interface id>

Command Reference Guide Route Map Command Set

set interface <interface type> <interface id>

Use the set interface command to specify an output interface for the packet. Multiple interfaces can be

specified. The router forwards the packet along the first usable interface. Use the no form of this command

to cancel output from the specified interface.

Syntax Description

<interface> Sets output interface type for the packet. Type set interface ? for

a list of valid interfaces.

<interface id> Specifies the ID of the specified interface type.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 2000 and 5000 Series, and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example sets the output interface as PPP 1:

(config)#route-map MyMap permit 100

(config-route-map)#set interface ppp 1