ADTRAN 5000 Series debug ip pim-sparse packets [in | out] <interface> <interface id>

Command Reference Guide Enable Mode Command Set

debug ip pim-sparse packets [in | out] <interface> <interface id>

Use the debug ip pim-sparse packets command to display protocol-independent multicast (PIM) sparse

mode packet information. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use

the no form of this command to disable debug messages.

Syntax Description

in Displays messages for inbound PIM sparse packets

out Displays messages for outbound PIM sparse packets.

<interface> Specifies specific interface. Type debug ip pim-sparse packets [in | out]

interface ? for a list of valid interfaces.

<interface id> Specifies a valid interface ID.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 2000, 5000, and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example activates all PIM sparse packet messages (both inbound and outbound):

>enable

#debug ip pim-sparse packet s