ADTRAN 5000 Series debug ip pim-sparse register [event

Command Reference Guide Enable Mode Command Set

debug ip pim-sparse register [event | state] <address>

Use the debug ip pim-sparse register command to display protocol-independent multicast (PIM) sparse

source registration messages. Debug messages are displayed (real time) to the terminal (or Telnet) screen.

Use the no form of this command to disable debug messages.

Syntax Description

event Displays PIM sparse register events.

state Displays PIM sparse register state changes.

<address> Specifies group address to filter.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 2000, 5000, and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example activates all PIM sp arse registeration state changes:

>enable

#debug ip pim-sparse register state