ADTRAN 5000 Series show lldp neighbors [interface <interface> l <interface type> | detail

Command Reference Guide Enable Mode Command Set

show lldp neighbors [interface <interface> l <interface type> | detail |

Use the show lldp neighbors interface command to display information about neighbors of this device

learned about via local loop demarkation point (LLDP).

Syntax Description

<interface> Displays a summary of all neigh bors learned about throu gh the specified interface

(e.g., eth 0/1). Type show lldp neighbors interface ? for a complete list of

applicable interfaces.

<interface type> Displays a summary of all neig hb or s lea rned about through interfaces of the

specified type (e.g., eth).

detail Optional. Shows detailed neighbor information for the specified interface or

interface type.

realtime Displays full-screen output in real time. See the Functional Notes below for more

information.

Default Values

No default values necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000, 1000R, 2000, 3000, 4000, and 5000 and

Total Access 900 Series units.

Command History

Release 8.1 Command was introduced.

Release 10.1 The real time display option was introduced.

Functional Notes

Use the realtime argument for this command to display full-screen output in real time. Information is

continuously update d on the console until you either freeze the data (by pressing the F key) or exit

realtime mode (by pressing Ctrl-C). If there is not enough room on the screen for all available data, the

information will truncate at the bottom of the screen. In order to maximize the amount of data displayed,

increase the terminal leng th (usin g the terminal length command; refer to terminal length <text> on page

276).