ADTRAN 5000 Series debug ip pim-sparse hello

Command Reference Guide Enable Mode Command Set

debug ip pim-sparse hello

Use the debug ip pim-sparse hello command to display protocol-independent multicast (PIM) sparse

mode hello transactions. Debug messages are displayed (real time) to the terminal (or Telnet) screen. Use

the no form of this command to disable debug messages.

Syntax Description

No subcommands.

Default Values

By default, all debug messages in the AOS are disabled.

Applicable Platforms

This command applies to the NetVanta 2000, 5000, and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example activates PIM sparse mode hello messages:

>enable

#debug ip pim-sparse hello