ADTRAN 5000 Series clear ip prefix-list <listname>

Command Reference Guide Enable Mode Command Set

clear ip prefix-list <listname>

Use the clear ip prefix-list command to clear the IP prefix list hit count shown in the show ip prefix-list

detail command output. Refer to show ip prefix-list [detail | summary] <listname> on page 226 for more

information.

Syntax Description

<listname> Specifies hit count statistics of the IP prefix list to clear.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 300, 1000R, 2000, 3000, 4000, and 5000 and Total Access 900

Series units.

Command History

Release 8.1 Command was introduced.

Usage Examples

The following example clears the hit count statistics for prefix list test:

>enable

#clear ip prefix-list test