ADTRAN 5000 Series LINE (SSH) INTERFACE CONFIG COMMAND SET

Command Reference Guide Line (SSH) Interface Config Command Set

LINE (SSH) INTERFACE CONFIG COMMAND SET

To activate the Line Secure Shell (SSH) Interface Configuration mode, enter the line ssh command

specifying a SSH session(s) at the Global Configuration mode prompt. For example:

>enable

configure terminal

(config)#

line ssh 0 4

(config-ssh0-4)#

You can select a single line by entering the line ssh command followed by the line number (0-4). For

example:

>enable

configure terminal

(config)#

line ssh 2

(config-ssh2)#

The following comm a nd s are com mo n to multiple command sets and are covered in a centralized section

of this guide. For more information, refer to the sections listed below:

do on page 32

end on page 33

exit on page 34

shutdown on page 35

All other commands for this command set are described in this section in alphabetical order.

access-class <listname> in on page 484

accounting commands [<level> l <name> l default] on page 485

authorization commands [<level> l <name> l default] on page 486

line-timeout <minutes> on page 487