ADTRAN 5000 Series set ip next-hop <ip address>

Command Reference Guide Route Map Command Set

set ip next-hop <ip address>

Use the set ip next-hop command to specify the interface for the next hop. Multiple IP addresses can be

specified. The packet is forwarded along the first usable IP address. Use the no form of this command to

cancel the next hop.

Syntax Description

<ip address> Specifies the IP address for the next hop.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 2000 and 5000 Series, and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Usage Examples

The following example set s the next hop IP a ddress as 10.10.11.254 in the header of the route map named

MyMap:

(config)#route-map MyMap permit 100

(config-route-map)#set ip next-hop 10.10.11.254