ADTRAN 5000 Series - page 570

Command Reference Guide Ethernet Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 570
ip rip send version [1 | 2]
Use the ip rip send version command to configure the RIP version the unit sends in all RIP packets
transmitted on the interface.
Syntax Description
1Transmits only RIP version 1 packets on the interface.
2Transmits only RIP version 2 packets on the interface.
Default Values
By default, all interfaces transmit RIP version 1 (the default value for the version command).
Applicable Platforms
This command applies to the NetVanta 2000, 3000, 4000, and 5000 and Total Access 900 Series units.
Command History
Release 1.1 Command was introduced.
Release 5.1 Command was expanded to include Ethernet sub-interfaces.
Functional Notes
Use the ip rip send versio n command to specify a RIP version that ov errides the version (in the Router
RIP) configuration. Refer to version [1 | 2] on page 1144 for more information.
The AOS only transmits one version (either 1 or 2) on a given interface.
Usage Examples
The following example configures the Ethernet interface to transmit only RIP version 2 packets:
(config)#interface eth 0/1
(config-eth 0/1)#ip rip send version 2