ADTRAN 5000 Series - page 627

Command Reference Guide T3 Interface Configuration Command Set
61200990L1-35E Copyright © 2005 ADTRAN 627
remote-loopback
Use the remote-loopback command to configure the T3 interface to be looped from the far end (remote
device, telco, etc.). Use the no form of this command to disable this feature.
Syntax Description
No subcommands.
Default Value
By default, all interfaces respond to remote loopbacks.
Applicable Platforms
This command applies to the NetVanta 5000 Series.
Command History
Release 6.1 Command was introduced.
Usage Examples
This example en ab le s rem o te loopba cks on the T3 interfac e:
(config)#interface t3 1/1
(config-t3 1/1)#remote-loopback