ADTRAN 5000 Series show ip local policy

Command Reference Guide Enable Mode Command Set

show ip local policy

Use the show ip local policy command to display information about the route-map used for local

policy-based routing.

Syntax Description

No subcommands.

Default Values

No default value necessary for this command.

Applicable Platforms

This command applies to the NetVanta 2000, 5000, and Total Access 900 Series units.

Command History

Release 11.1 Command was introduced.

Usage Example

The following is sample output from this

command:

>enable

show ip local policy

Local policy routing is enabled, using route-map equal

route-map equal, permit, sequence 10

Match clauses:

length 150 200

Set clauses:

ip next-hop 10.10.11.254

Policy routing matches: 0 packets, 0 bytes

route-map equal, permit, sequence 20

Match clauses:

ip address (access-lists): 101

Set clauses:

ip next-hop 10.10.11.14

Policy routing matches: 2 packets, 172 bytes