Command Reference Guide Frame Relay Interface Config Command Set
61200990L1-35E Copyright © 2005 ADTRAN 692

FRAME RELAY INTERFACE CONFIG COMMAND SET

To activate the Frame Relay Interface Configuration mode, enter the interface frame-relay command at
the Global Configuration mode prompt. For example:
>enable
#
configure terminal
(config)#
interface frame-relay 1
(config-fr 1)#
The following comm a nd s are com mo n to multiple command sets and are covered in a centralized section
of this guide. For more information, refer to the sections listed below:
alias <“text”> on page 27
cross-connect <#> <from interface> <slot/port> <tdm-group#> <to interface> <slot/port>
on page 28
description <text> on page 31
do on page 32
end on page 33
exit on page 34
shutdown on page 35
All other commands for this command set are described in this section in alphabetical order.
bandwidth <value> on page 693
encapsulation frame-relay ietf on page 694
fair-queue <threshold> on page 695
frame-relay commands begin on page 696
hold-queue <queue size> out on page 708
max-reserved-bandwidth <percent> on page 709
qos-policy out <mapname> on page 710
snmp trap on page 712
snmp trap link-status on page 713