Allied Telesis manual Installing the AT-CV5000 Chassis in a Rack, 236

Chapter 2: Installation

Installing the AT-CV5000 Chassis in a Rack

The chassis is shipped with two rack-mounting brackets. To mount the chassis in a rack, perform the following procedure:

1.Place the chassis on a level, secure surface.

2.Attach the brackets to the sides of the chassis using four screws (provided) on each side, as shown in Figure 18

AT-CV5000

AT-
	CM202	AT-	CM202
LK	AT
		LK	AT
LK	AT
		LK	AT

236

Figure 18. Installing a Bracket to the Chassis

3.Mount the chassis in a 19-inch rack using appropriate screws (not provided), as shown in Figure 19.

AT-
	CM202	AT-	CM202
LK	AT
		LK	AT
LK	AT
		LK	AT
T
X
		T
		X
RDY
ML/SML	FD/OAM	RDY
		ML/SML	FD/OAM

AT-
CV5LED
RDY	MSTR FLT
FAN1
PS1
PS-A	PS-B
RDY

RESET		LINE/SFM
FAN-A
	FAN-B

237

Figure 19. Mounting the AT-CV5000 Chassis in a 19-inch Rack

Caution: Air vents must not be blocked and must have free access to the room ambient air for cooling.  E6

48