Allied Telesis AT-CV5000 manual Resetting Converteon Line Cards/Rear Expansion Module

AT-CV5000 Media Converter Chassis Installation Guide

Resetting the Line Cards and the Module in the Rear Expansion Slot

To reset the line cards and the module in the rear expansion slot, perform the following procedure:

1.Locate the RESET LINE/EXP button, which is recessed on the front panel of the LED interface card.

Note

This RESET LINE/EXP button located on the LED interface card allows you to reset the line cards in the front of the chassis and any module in the rear expansion slot. This button does not reset any management cards in the chassis.

2.Press the reset button with the tip of a pen or a non-conductive pointed object, as shown in Figure 55.

AT-
CV5LED
RDY	MS		F
FAN1		TR		LT
PS1
PS-A	P	S-B
RDY
REAR SLOT CONS
OLE
RESET		LINE/EXP
FAN-A F
		AN-B

261

Figure 55. Resetting Converteon™ Line Cards/Rear Expansion Module

81