AT-CV5000 Media Converter Chassis Installation Guide
4.Slide the management card into the slot, as shown in Figure 50, until the front of the card is flush with the front of the chassis.
AT- | CV5 | M01 | |
PWR |
| ||
RDY | FLT | ||
|
7 |
8 |
9 |
10 |
LK | AT | FD |
|
|
CPU RESET
241
Figure 50. Inserting the AT-CV5M01 Management Card
5.Secure the AT-CV5M01 Management Card to the chassis by using a Phillips screwdriver to tighten the captive screw on the management card faceplate, as shown in Figure 51.
Resetting an
AT-CV5M01
Management
Card
AT- |
|
|
PWR | RDY | FLT |
|
|
LK | AT | FD |
|
|
CPU RESET
243
Figure 51. Tightening the Captive Screw
Note
Always tighten the captive screw to secure the management card to the chassis. Leaving a management card partially seated may cause the CPU to halt and subsequently crash.
To reset the AT-CV5M01 Management Card, perform the following procedure.
1.Locate the CPU RESET button which is recessed in the front panel of the AT-CV5M01 Management Card.
77
