Allied Telesis AT-CV5000 manual AT-CV5PNL3

AT-CV5000 Media Converter Chassis Installation Guide

Installing an

AT-CV5PNL3

Blank Slot Cover

Note

Always tighten the captive screws to secure the blank slot cover to the chassis.

The AT-CV5PNL3 blank slot cover is designed to cover the unoccupied expansion slot located in the rear of the AT-CV5000 chassis.

To install an AT-CV5PNL3 blank slot cover, perform the following procedure:

1.Remove the AT-CV5PNL3 blank slot cover from its shipping package and store the package in a safe place.

Note

You must use the original package if you need to return the unit to Allied Telesis.

2.Align the back edge of the blank slot cover with the alignment guides located inside the slot.

3.Slide the blank slot cover into the slot, as shown in Figure 70, until the slot cover is flush with the front of the chassis.

A CVFAN-AT

	A
100-
240VAC~	WARNING
	This unit
	reduce themight have		more than
	risk of
		electric shock,one power
			disconnectinput. To
			all power
	AT-
	POWER		CV5PWR	AC
	FAULT

REAR	EXP.
	SLOT

	reWARNINGThdisucuenthit me ight have	B
AT-	risk of elemctore than
		disconnecint paulltp. To
	CV5PWR1	ric shock,one power
		ower	100-
POWER		4	240VAC~
FAULT

B AT-CV5FAN

227

Figure 70. Inserting an AT-CV5PNL3 Blank Slot Cover

93