Allied Telesis AT-CV5000 manual Figures

Figures

Figure 1. AT-CV5000 Media Converter		18
Figure 2.	Front Panel of the AT-CV5000 Chassis	20
Figure 3. Rear Panel of the AT-CV5000 Chassis (AC Version)		20
Figure 4. Rear Panel of the AT-CV5000 Chassis (DC Version)		20
Figure 5. LED Interface Card Components		21
Figure 6. AT-CV5M01 Management Card Components		24
Figure 7. AT-CV5PNLx Series Blank Slot Covers		30
Figure 8. AT-CV5000 AC Powered Chassis		31
Figure 9. AT-CV5000 DC Powered Chassis		31
Figure 10. AT-CVFAN Module		32
Figure 11. Locations of Fan Slots A and B on an AT-CV5000 Rear Panel		32
Figure 12. Standalone Network Topology		36
Figure 13. Back-to-Back Network Topology		37
Figure 14.	Power Cord Retaining Clip	46
Figure 15.	Power Cord Retaining Bracket	46
Figure 16.	Inserting the Retaining Clip into the Retaining Bracket	46
Figure 17.	Retaining Clip Properly Installed in the Bracket	47
Figure 18.	Installing a Bracket to the Chassis	48
Figure 19. Mounting the AT-CV5000 Chassis in a 19-inch Rack		48
Figure 20. Frame Ground Connectors		50
Figure 21.	Connecting the Wire to the Ground Lug	50
Figure 22. Placing the Ground Lug on the Frame Ground Stud		51
Figure 23. Securing the Ground Lug with Lock Nut		51
Figure 24.	Location of the Alignment Guides	53
Figure 25.	Inserting a Line Card	53
Figure 26.	Tightening the Captive Screw	54
Figure 27. Dual SC Port		55
Figure 28. Removing the Dust Cover from a Dual SC Fiber Optic Port		56
Figure 29.	Connecting to the Dual SC Fiber Optic Port	56
Figure 30. Removing the Dust Cover from a Simplex SC Fiber Optic Port		57
Figure 31.	Connecting to the Simplex SC Fiber Optic Port	57
Figure 32.	Connecting to the Twisted Pair Port	58
Figure 33.	Inserting an SFP Transceiver into the SFP Slot	59
Figure 34. Removing the Dust Cover from the SFP Transceiver		59
Figure 35.	Connecting Fiber Optic Cables to the SFP Transceiver	59
Figure 36. ON/OFF Power Switch in OFF Position		60
Figure 37.	Power Cord Retaining Clip in the Up Position	61
Figure 38. Connecting the AC Power Cord		61
Figure 39.	Securing the Power Cord with the Retaining Clip	61
Figure 40. ON/OFF Power Switch in ON Position		62
Figure 41. DC Terminal Block		64
Figure 42.	Stripped Wire	65
Figure 43.	Inserting Wires into a DC Terminal Block	66
Figure 44. Connecting a Management Cable to the RS-232 Terminal Port on an AT-CV5M01 Management Card		67
Figure 45. Connecting a Management Cable to the RS-232 Console Port on an AT-CM70S Line Card		67
Figure 46. AT-S70 Main Menu		68
Figure 47. Connecting a Twisted Pair Cable to the 10/100Base-TX Port on the AT-CV5M01 Management Card		70
Figure 48. Line Card Removal Tool		74
Figure 49. Removing a Line Card from an AT-CV5000 Chassis		74
Figure 50. Inserting the AT-CV5M01 Management Card		77

9