Allied Telesis AT-CV5000 manual Starting a Local Management Session

AT-CV5000 Media Converter Chassis Installation Guide

Starting a Local Management Session

The procedure in this section explains how to start a local management session using the RS-232 terminal port on an AT-CV5M01 Management Card or the 8-pin Mini-DIN port on an AT-CM70S line card installed in the chassis.

Note

If an AT-CM70S line card is installed in an AT-CV5000 chassis, you can manage the card either through its console port or through the AT-CV5M01 Management Card.

Note

Only one manager can log in at a time.

To start a local management session using the RS-232 terminal port on an AT-CV5M01 Management Card or the 8-pin Mini-DIN on an AT-CM70S line card, perform the following procedure:

1.Do one of the following:

a.Connect one end of the RS-232 straight-through management cable to the RS-232 terminal port on the front of the AT-CV5M01 Management Card, as shown in Figure 44.

LK AT FD

244

Figure 44. Connecting a Management Cable to the RS-232 Terminal Port

on an AT-CV5M01 Management Card

b.Connect the 8-pin Mini-DIN end of the management cable to the RS-232 console port on the front of the AT-CM70S line card, as

shown in Figure 45 on page 67.

F
P
CPU
	RESET
C
O
N
S
L/A	FD 100

1

2

RCL NML

LNOMTLC 3

T	4
X

RDY

AIS 1 2

910

Figure 45. Connecting a Management Cable to the RS-232 Console Port

67