AT-S70 Main Menu | Allied Telesis AT-CV5000 specs

on an AT-CM70S Line Card

2.Connect the other end of the cable to an RS-232 port on a terminal or a personal computer with a terminal emulation program.

3.Set the terminal or terminal emulation program to the following defaults:

Baud rate: 115200 bps

Data bits: 8

Parity: None

Stop bits: 1

Flow control: None

Note

The settings are for a DEC VT100 or ANSI terminal, or an equivalent terminal emulation program.

The software initializes and then the login prompt is displayed.

4.When prompted, enter a username and password.

To configure the chassis settings, enter “manager” as the username. The default password for manager access is “friend”.

To just view the settings, enter “operator” as the username. The default password for operator access is “operator”.

Usernames and passwords are case-sensitive.

The Main Menu is displayed, as shown in Figure 46.

Allied Telesis AT-CV5M01 Management Module Software

CV-5000 Chassis

Main Menu

Module Status and Configuration

Remote Module Status and Configuration

Administration

Image Download

System Configuration

Quit

Allied Telesis AT-CV5000 manual AT-S70 Main Menu