InfraStruXure System—Installation and Start-Up 1
Safety

Overview

Save these instructions

This manual contains important instructions that must be followed during installation, operation, and
maintenance of the InfraStruXure System.

Safety symbols used in this manual

Cross-refe rence symbols used in this ma nual

Electrical
Hazar
d
Indicates an electrical hazard, which, if not avoided, could result in injury or
death.
Warning
Indicates a hazard, which, if not avoided, could result in personal injury or
damage to product or other property.
Caution
Indicates a potential hazard which could result in damage to product or other property.
Note
Indicates important information.
Heavy
Indicates a heavy load that should not be lifted without assistance.
Indicates a standby state. When in standby, the unit is not operating, but it may still
contain hazardous voltage. It is not safe to service until the equipment is
disconnected from all sources of electrical power.
See als
o
Indicates that more information is available on the same subject in a different manual.
Indicates that more information is available on the same subject in a different section
of this manual.