Install InfraStruXure Rack-Mount Devices
Install the Rack Automatic Transfer Switches (ATS)
Install a Rack ATS in the top of each enclosure for overhead wiring, and in the bottom of each enclosure for wiring under the floor.
See the installation instructions in the manual included with your Rack ATS.
See also
The Rack ATS is an optional component and not all InfraStruXure systems will include them.
Install the Rack Power Distribution Units (PDU)
Install Rack PDUs in the rear of the NetShelter VX enclosure, in the channel directly behind the rear vertical mounting rails. For overhead wiring, make sure that the power cord is pointing toward the roof of the enclosure. For under the floor wiring, make sure that the power cord is pointing toward the floor.
See the installation instructions in the manual included with your Rack PDU.
See also
Install the InfraStruXure Manager and Hub (or Switch)
Install the InfraStruXure Manager in the enclosure closest to the InfraStruXure PDU. The
See the installation instructions in the manual included with your InfraStruXure Manager.
See also
Install the Environmental Monitoring Unit or Environmental Management System
Install the Environmental Monitoring Unit or Environmental Management System according to the installation instructions included with the device. The Environmental Monitoring Unit and Environmental Management System are optional components and not all InfraStruXure systems will include them.
InfraStruXure | 41 |
