Brother HL-1260 Press, Switch to check the font cartridge, Flash memory check, MIO check

(10) Press the

CONTINUE

switch to check the font cartridge.

CART CHECK START

FONTCART OK!!

The font cartridge is normal.

(11)Flash memory check

CARD CHECK START

FLASH OK!!

The flash memory is normal.

(12) MIO check

MIO CHECK START

RAM SIZE = 2M

Now initializing

LJ WAIT 001P T1

LJ READY 001P T1

You can turn off the power when this message is displayed. If there is no toner cartridge or paper, the message "14 NO CARTRIDGE" will be displayed.

(13) Turn off the power.

Note:	The checks on and after (10) are carried out automatically, and if an error is detected,
	on of the following messages will be displayed. Checks can be resumed if the
	CONTINUE switch is pressed.

FONTCART ERROR!!

Font cartridge error (this message is displayed if a font cartridge than a Hewlett Packard Company C2053A#C01 Word Perfect is used.)

NO FONTCART!!

No font cartridge is set.

FLASH ERROR!!

Flash memory error

NO FLASH CARD!!

No flash memory is set.

CHECK WP SWITCH

The Write Protect switch of the flash memory is on.

45 MIO ERROR

MIO error

NO MIO BOARD!!

No MIO board is set.

Now initializing

MIO error if this message remains displayed.

VI - 24