Brother HL-1260 service manual Feeder Switch

USER’S GUIDE

FEEDER Switch

You can select the feeder, manual feed mode, or MP tray settings with the FEEDER switch, and also select the duplex printing mode if the optional duplex printing unit is installed.

Display Message	Feeder
FEEDER=AUTO	Select a feeder or auto paper feed.
MP FIRST=OFF	Turns MP first on or off.
MANUAL FEED=OFF	Turns manual feed on or off.
MP TRAY SETTING	MP tray settings
MEDIA TYPE	Select print media
DUPLEX MODE	Selects duplex printing mode (only
	with the duplex option installed.)

You can check the current feeder and the duplex mode on the display.

When tray 1 has been selected, the display may look as follows:

00 READY 001P T1

When the multi-purpose tray and the duplex printing mode have been selected, the display may look as follows:

00 READY 001P■MP

The black square ■ indicates that duplex printing mode is selected.

When you want to change settings with the FEEDER switch, hold down the SHIFT switch and press the FEEDER switch. You will then enter the setting mode where you change the feeder, manual feed mode, etc.

FEEDER

To select the feeder, follow these steps:

1.Press the SEL switch to set the printer off-line.

2.Hold down the SHIFT switch and press the FEEDER switch.

When you enter the setting mode, the display first shows the current feeder setting with the asterisk.

4–70