Brother HL-1260 service manual DC Gear Holder Assy, PS Switch Wire, Remote Switch

1.31DC Gear Holder Assy

(1)Remove the DC motor connector, then remove the paper delivery holder spring.

(2)Loosen the 4 screws and remove the DC gear unit from the body.

(3)Remove the paper delivery gear assy, the gears, the gear 48 spring, and the washer.

(4)Loosen the 3 screws and remove the DC motor assy from the gear holder.

DC gear unit	Paper delivery		Paper delivery gear assy
	holder spring
			Gear 48
			Gear 48 spring
			Gear 21
	4 screws	Gear 28	Washer

Gear 20/50

Gear 22/55

Gear 24/72

Gear 39

PS switch wire	3 screws
Remote switch	DC motor assy
	DC gear holder assy
Figure 4.58	Connector
	Figure 4.59

1.32PS Switch Wire, Remote Switch

(1)Pull out the PS switch wire from the remote switch and the switch attachment.

Lift slightly the wires when pulling them out. This is in order to release the chassis caught at 2 places.

(2)Remove the remote switch from the chassis.

Switch attachment

Remote switch

Remote switch

Chassis

PS switch wire

Figure 4.60 Figure 4.61

IV - 23