Brother HL-1260 service manual Paper IN=CONT, Media Type

USER’S GUIDE

2.Press the ▲ or ▼ switch to select the paper size in the multi-purpose tray.

✒Note

When you select the multi-purpose tray as a paper source, you must set the “MP SIZE” manually since the tray cannot sense the size automatically.

3.Press the SET switch to make the displayed setting effective.

Then the display shows the current “PAPER IN” setting with the asterisk as follows:

PAPER IN=CONT *

4.Press the ▲ or ▼ switch to select the printer action to continue or stop during manual feed.

✒Note

You can select the printer action either to continue or to stop printing when you select the manual feed with this switch or by a command. When you set “PAPER IN=CONTINUE”, the printer feeds paper from the multi-purpose tray. When you set “PAPER IN=STOP”, the printer stops feeding paper until the SEL key is pressed. If you want to place the paper on the multi- purpose tray after you make a print request from the PC, select the “PAPER IN=STOP” so that the printer waits for the paper.

5. Press the SET switch to make the setting effective.

MEDIA TYPE

When you use any paper other than ordinary plain paper, such as thick bond paper, envelope, or transparency, the appropriate media type must be selected in the media type mode in order to get the best print quality.

To select a media type, follow these steps:

1. The display shows the following message:

MEDIA TYPE

4–74