Brother HL-1260 Interface Specifications, Bi-directional Parallel Interface, Interface Connector

USER’S GUIDE

INTERFACE SPECIFICATIONS

Bi-directional Parallel Interface

Interface Connector

A shielded cable that is IEEE 1285 compliant with the following pin assignment should be used. Most existing parallel cables support bi- directional communication, but some might have incompatible pin assignments or may not be IEEE 1284 compliant.

18 15 12 9 6 3 1

36	33	30	27	24	21	19
Fig. A-1		Parallel Interface Connector
Pin Assignment
Pin No.	Signal				Pin No.		Signal
1	DATA STROBE				19		Twisted pair ground
2	DATA 0				20		Twisted pair ground
3	DATA 1				21		Twisted pair ground
4	DATA 2				22		Twisted pair ground
5	DATA 3				23		Twisted pair ground
6	DATA 4				24		Twisted pair ground
7	DATA 5				25		Twisted pair ground
8	DATA 6				26		Twisted pair ground
9	DATA 7				27		Twisted pair ground
10	ACKNLG				28		Twisted pair ground
11	BUSY				29		Twisted pair ground
12
	PE				30		INPUT PRIME RET
13	SLCT				31		INPUT PRIME
14	AUTO FEED				32		FAULT
15	N.C.				33		N.C.
16	0V				34		N.C.
17	0V				35		N.C.
18
	+5V				36		SELECT IN

Appendix–8