Brother HL-1260 Auto LF =OFF, Auto CR =OFF, Auto Wrap =OFF, Auto Skip =ON, Auto Mask =OFF

CHAPTER 4 CONTROL PANEL

When portrait has been selected, the display may look as follows:

00 READY 001P T1

When landscape has been selected, the display may look as follows:

00 READY 001L T1

AUTO MODE

✒Note

The settings in this mode menu are effective in the HP LaserJet 4+, EPSON FX-850, and IBM Proprinter XL modes. They do not appear in other emulation modes.

The page/line termination is set in this mode.

Display Message		Setting	Auto Mode
AUTO LF	=OFF	ON	CR → CR+LF
		OFF	CR → CR
AUTO CR	=OFF	ON	LF → LF+CR, FF → FF+CR, VT → VT+CR
		OFF	LF → LF, FF → FF, VT → VT
AUTO WRAP =OFF		ON	Line feed and carriage return occur when the printer
			position reaches the right margin.
		OFF	No line feed and carriage return occur when the printer
			position reaches the right margin.
AUTO SKIP =ON		ON	Form feed occurs when the printer position reaches the
			bottom margin.
		OFF	No form feed occurs when the printer position reaches
			the bottom margin.
AUTO MASK =OFF		ON	The printer ignores the top and bottom margin settings
			you make with the control panel. The page length is
			automatically set to 11” for letter or A4-size paper and
			to 14” for legal-size paper.
		OFF	The printer operates according to the margin settings
			you make with the control panel.

4–21