Brother HL-1260 service manual Removing the Left Side Cover

CHAPTER 5 OPTIONS

4. Remove the left side cover by sliding it to the rear of the printer.

Fig. 5-6 Removing the Left Side Cover

✒Note

Be careful not to connect the network interface cable into the modular jack for options located inside the left side cover, or it may damage the printer.

5. Loosen the screws and then slide and remove the metal cover.

Screw(Yellow)

Fig. 5-7 Removing the Metal Cover

6. Unpack a SIMM and hold it on its edge.

✒Note

Do not touch the memory chips or the board surface. If static electricity collects, it damages the memory.

5–9