Brother HL-1260 service manual DC Gear Holder Assy, Scanner fan motor

1.31DC Gear Holder Assy

(1)Remove the DC motor connector, then remove the paper delivery holder spring.

(2)Loosen the 4 screws and remove the DC gear unit from the body.

(3)Remove the paper delivery gear assy, the gears, the gear 48 spring, and the washer.

(4)Loosen the 3 screws and remove the DC motor assy from the gear holder.

DC gear unit	Paper delivery	Paper delivery gear assy
	holder spring
		Gear 48
		Gear 48 spring
		Gear 21

4 screws

Gear 28

Washer

Gear 20/50

Gear 22/55

Gear 24/72

Gear 39

PS switch wire
	3 screws
Remote switch	DC motor assy
	DC gear holder assy
Figure 4.11	Connector
	Figure 4.12

1.31.1Scanner fan motor

(1)Loosen the 1 screw and remove the scanner fan holder.

(2)Loosen the 2 screws and pull out the scanner fan holder from the scanner fan motor.

(3)Remove the scanner fan motor harness connector from the main PCB.

screw

Scanner mount plate

2 screws

Scanner fan motor

Scanner fan holder

Figure 4.13

IV - 6