Brother HL-1260 service manual Save Data, Save Macro, Primary Font, Download Font

CHAPTER 4 CONTROL PANEL

■Card List

When you select “CARD LIST” and you press the SET switch, the printer automatically loads paper and starts printing the contents of the installed flash memory card or HDD card. You can check the contents and the unused capacity of the card.

■Save

When you select “SAVE” and you press the SET switch, you can enter the following sub-setting menus to save the macros and fonts in the installed card:

Display Message	Save Menu
SAVE DATA	Save data that the printer will receive and set
	its ID.

SAVE MACRO

Save a macro. This menu appears only in the HP LaserJet 4+ emulation mode.

PRIMARY FONT

Save the primary font selected with the FONT switch. This menu appears only in the HP LaserJet 4+ emulation mode.

SECONDARY FONT Save the secondary font selected with the FONT switch. This menu appears only in the HP LaserJet 4+ emulation mode.

DOWNLOAD FONT

Save a download font. This menu appears only in the HP LaserJet 4+ emulation mode and BR-Script 2 mode.

✒Note

If the capacity of the card becomes low while macros and fonts are being saved, the display shows the “CARD FULL” error message and they cannot be saved. Use a new card or delete unnecessary macros and fonts from the card. The CARD LIST displays the contents and the used capacity.

4–35