CHAPTER 4 CONTROL PANEL

3.Press the SET switch.

When you enter the “SELECT FONT” menu, you ca n select the internal font, optional slot font, or permanent download font. The display shows the following message.

INTERNAL FONT *

Press the or switch until the desired font source appears on the display.

Display Message

Font Source

INTERNAL

FONT

Internal font of the printer

 

 

 

SLOTFONT

A

Optional card font in the upper slot

 

 

A

 

 

 

SLOTFONT B

Optional cartridge font in the lower slot B

PERMANENT FONT

Permanent download font defined in the HP emulation mode

Since these steps instruct you to select the standard font, select the “INTERNAL FONT” message.

Notes

When you select the optional fonts or permanent download fonts, note the following:

If the optional font cartridge/card is not installed, the optional font cannot be selected. No selection appears on the display.

If permanent fonts are not downloaded in the HP emulation mode or another emulation mode is selected, the permanent fonts cannot be selected. No selection appears on the display.

When you select the optional font or download font, press the SET switch to enter the sub-menu. After you select your desired one with the or switch, press the SET switch again. The list you can print out with the TEST switch helps you to select the optional fonts or permanent download fonts. See “TEST switch” in this chapter or “Selecting the Optional Fonts” in Chapter 5 .

4.Press the SET switch.

When you enter the font setting mode, the display first shows the current font with an asterisk.

4–55

Page 334
Image 334
Brother HL-1260 service manual Internal Font