Brother HL-1260 service manual Paper delivery actuator Fixing unit cover

(7) Release the left hook and take off the paper delivery actuator.

Paper delivery actuator

Fixing unit cover

Figure 4.52

(8)

1)Remove the fixing heat insulation cover ( by loosening the 2 screws), the pressure roller spring and pressure roller bearing on both sides, and the pressure roller.

Screws

Pressure roller bearing

Pressure roller Heat insulation cover

Pressure roller spring

Fixing unit chassis

Figure 4.53 Figure 4.54

2)Remove the retaining rings (on both sides).

3)Remove the HR gear, loosen the screw and remove the spring washer, remove the left and right HR bearings and the heat roller by sliding it.

Screw

Spring washer

Retaining ring Heat roller

HR bearing

HR gear

Retaining ring

HR bearing

Figure 4.55

IV - 21