Brother HL-1260 service manual Auto FF=OFF, Wait TIME= 1s

CHAPTER 4 CONTROL PANEL

You can turn on or off the auto form feed in this mode menu as follows:

Display Message	Auto Form Feed
AUTO FF=OFF	Turn off the auto form feed. You need to
	press the FORM FEED switch every time
	data remains in the printer’s memory.
	(Factory setting)

AUTO FF=ON

Turn on the auto form feed. Every time data remains in the printer’s memory, the auto form feed takes place after the wait time set as below.

When you turn on the auto form feed as above, you need to set the wait time in the following sub-setting menu:

Display Message	Wait Time
WAIT TIME= 1s	Set the wait time for the auto form feed.
.	The printer automatically prints out the
.	remaining data after the set wait time.
WAIT TIME=99s	The wait time can be set from 1 to 99
	seconds.

■Form Feed Suppress

You can turn on or off the form feed suppress function in this mode menu as follows:

Display Message Form Feed Suppress

FFSUPPRESS=OFF Turn off the form feed suppress function.

(Factory setting)

FFSUPPRESS=ON Turn on the form feed suppress function.

If pages contain no print data, the printer would normally print blank pages. When you turn this function on, you can suppress printing blank pages.

When the printer is used in the network environment, it may print a blank page at the end of each print job. When you turn on this function, the printer does not print blank pages.

4–43