Brother HL-1260 service manual Modular I/O Card, Installing the MIO Card

USER’S GUIDE

MODULAR I/O CARD

This printer has a modular input/output (MIO) interface slot on the rear panel. This slot allows you to install a commercial MIO-compatible sharing/network card.

For more information about MIO cards, consult the dealer where you purchased this printer.

When you install the MIO card, follow these steps:

1. Turn off the printer and unplug the power cord from the wall socket.

✒Note

Be sure to turn off the power to the printer before installing or removing the

MIO card.

2.Remove the two screws and cover plate from the MIO interface slot.

3.Unpack the MIO card and hold it on its edge.

✒Note

Do not touch the card surface. If static electricity collects, it damages the card.

4. Insert the card until it is securely seated.

5 Secure the MIO card with the two captive screws on the card

6.Retain the cover plate and two screws removed in 2 in case you want to remove the MIO card later.

MIO Interface Slot

MIO Card

Fig. 5-4 Installing the MIO Card

5–6