Brother HL-1260 service manual Error Turn off the printer. Wait a, Service

Table 6.3 Service Call Messages

Service Call Message	Meaning	Action
50 FUSER MALF	Malfunction of fuser	Turn off the printer. Wait
		15 minutes, then turn it on
		again. See M-14.
51 LASER BD MALF	Malfunction of laser beam	Turn off the printer. Wait a
	detector	few seconds, then turn it
		on again. See M-15.
52 SCANNER MALF	Malfunction of laser	Turn off the printer. Wait a
	scanner motor	few seconds, then turn it
		on again. See M-16.
53 DX FAN MALF	Malfunction of fan motor in	Turn off the printer. Wait a
	the duplex unit.	few seconds, then turn it
		on again.
54 MOTOR MALF	Malfunction of main motor	Turn off the printer. Wait a
		few seconds, then turn it
		on again. See M-11.
55 HIGH VOL MALF	Malfunction of high-	Turn off the printer. Wait a
	voltage power supply	few seconds, then turn it
		on again. See M-13.
61 PROG ERROR	Program ROM checksum	Turn off the printer. Wait a
	error	few seconds, then turn it
		on again.
62 FONT ERROR	Font ROM checksum	Turn off the printer. Wait a
	error	few seconds, then turn it
		on again.
63 D-RAM ERROR	D-RAM error	Turn off the printer. Wait a
		few seconds, then turn it
		on again.
66 NV-W ERROR	NV-RAM error	Turn off the printer. Wait a
		few seconds, then turn it
		on again.
67 NV-R ERROR	NV-RAM error	Turn off the printer. Wait a
		few seconds, then turn it
		on again.
68 NV-B ERROR	NV-RAM error	Turn off the printer. Wait a
		few seconds, then turn it
		on again.
60 SYSTEM ERROR	Error in XXXXX.	Turn off the printer. Wait a
XXXXX		few seconds, then turn it
		on again.
99 SERVICE 1	Fatal Error Exp.	Turn off the printer. Wait a
		few seconds, then turn it on
		again. If it's still displayed
		on the LCD, replace the
		Main PCB.

VI - 12