Brother HL-1260 service manual High-Voltage Power Supply PCB, Low-Voltage Power Supply PCB Assy

1.33High-Voltage Power Supply PCB

(1)Loosen the 2 screws.

(2)Hold the head of 4 resin spacers and lift this side of PCB ( A ).

(3)Slide the PCB to the opposite side ( B ).

Resin spacers

Screws

	High-voltage power supply PCB assy
Resin spacers	The PCB can be detached without
Figure 4.62	removing this spacer

1.34 Low-Voltage Power Supply PCB Assy

(1) Be sure to remove the heat insulation cover before removing the low-voltage power supply block.

Heat insulation cover

B

C

A

Hook

Heat insulation cover

Hook

Figure 4.63

(2)	Remove the PS switch wire.
(3)	Loosen the 2 screws on the side.	Screw
(4)	Loosen the 4 screws on the top.
		Screw

Screw

PS switch wire

Screw

Screw

Low-voltage power supply

PCB assy

Figure 4.64

IV - 24