Brother HL-1260 service manual Mode Switch Settings in BR-Script 2 Mode

CHAPTER 4 CONTROL PANEL

MODE Switch Settings in BR-Script 2 Mode

The following table shows all the selections you can make with the MODE switch in the BR-Script 2 mode.

✒Note

The mode menus and settings that can appear vary according to the current emulation mode, printer status, and any options that may be installed in the printer.

Mode Menu	Setting Menu	Sub-Setting Menu		Setting
INTERFACE MODE
Same as HP LaserJet 4+ Mode
(See 4-17.)
FORMAT MODE	X OFFSET=0			-500 (left) to +500 (right) dots
(See 4-22.)	Y OFFSET=0			-500 (up) to +500 (down) dots
	exit			Exit to PAGE FORMAT MODE
RESOLUTION MODE	RESOLUTION	RESOLUTION=600		300 or 600 dpi
(See 4-28.)	APT SETTING	APT=OFF		ON or OFF
	HRC SETTING	HRC=MEDIUM		OFF, LIGHT, MEDIUM, or DARK
	exit			Exit to RESOLUTION MODE
CARD OPERATION	When the commercial flash memory card or the HDD card has not been formatted:
(See 4-32.)	FORMAT CARD			Format the flash memory card or
				the HDD card.
	exit			Exit to CARD OPERATION
CARD OPERATION	When the commercial flash memory card or the HDD card has been formatted:
(See 4-32.)	EXECUTE DATA			Execute the data on the card.
		DATA ID=#####		Execute the selected data.
		exit		Exit to EXECUTE DATA
	CARD LIST			Print the contents of the card.
	SAVE	SAVE DATA		Send data to be saved.
			SET KEY--> END	End saving the data.
			DATA ID=#####	Set data ID for saved data.
		exit		Exit to CARD OPERATION
	DELETE	MACRO ID=#####		Delete the selected macro.
		DATA ID=####		Delete the selected data.
		FONT ID=#####		Delete the selected font.
		FORMAT CARD		Format the card.
			SET –> DELETE ALL	Execute formatting the card.
			exit	Exit to FORMAT CARD
				OPERATION
	exit			Exit to CARD OPERATION

4–11