Brother HL-1260 service manual Service Call Messages, Service Call Message Meaning Action

Table 6.4 Service Call Messages

	Service Call Message	Meaning	Action
50	FUSER MALF	Malfunction of fuser	Turn off the printer. Wait
			15 minutes, then turn it
			on again. See M-14.
51	LASER BD MALF	Malfunction of laser beam	Turn off the printer. Wait
		detector	a few seconds, then turn
			it on again. See M-15.
52	SCANNER MALF	Malfunction of laser	Turn off the printer. Wait
		scanner motor	a few seconds, then turn
			it on again. See M-16.
53	DX FAN MALF	Malfunction of fan motor	Turn off the printer. Wait
		in the duplex unit.	a few seconds, then turn
			it on again.
54	MOTOR MALF	Malfunction of main motor	Turn off the printer. Wait
			a few seconds, then turn
			it on again. See M-11.
55	HIGH VOL MALF	Malfunction of high-	Turn off the printer. Wait
		voltage power supply	a few seconds, then turn
			it on again. See M-13.
61	PROG ERROR	Program ROM checksum	Turn off the printer. Wait
		error	a few seconds, then turn
			it on again.
62	FONT ERROR	Font ROM checksum	Turn off the printer. Wait
		error	a few seconds, then turn
			it on again.
63	D-RAM ERROR	D-RAM error	Turn off the printer. Wait
			a few seconds, then turn
			it on again.
66	NV-W ERROR	NV-RAM error	Turn off the printer. Wait
			a few seconds, then turn
			it on again.
67	NV-R ERROR	NV-RAM error	Turn off the printer. Wait
			a few seconds, then turn
			it on again.
68	NV-B ERROR	NV-RAM error	Turn off the printer. Wait
			a few seconds, then turn
			it on again.
60	SYSTEM ERROR	Error in XXXXX.	Turn off the printer. Wait
XXXXX			a few seconds, then turn
			it on again.

VI - 29