Brother HL-1260 =Auto, =Parallel, =Option, Operation Example Selecting the Parallel Interface

USER’S GUIDE

Operation Example: Selecting the Parallel Interface

For this session, select the parallel interface manually as follows:

1.Press the SEL switch to set the printer off-line.

2.Press the MODE switch.

The display shows the first menu.

INTERFACE MODE

3.Press the SET switch.

When you enter the interface mode, the display first shows the current interface with the asterisk.

I/F=AUTO *

4.Press the ▲ or ▼ switch until the desired interface appears on the display.

I/F=PARALLEL

Display Message	Interface Mode
I/F=PARALLEL	Parallel interface
I/F=RS-232C	Serial interface
I/F=OPTION	Optional interface for MIO card
I/F=AUTO	Auto interface selection

✒Note

The optional interface is available only when a commercial MIO compatible sharing/network card has been installed.

5.Press the SET switch to make the displayed selection effective.

An asterisk appears at the end of the display for a short time. Then the printer automatically exits from the setting menu to the interface menu.

INTERFACE MODE

4–16