Brother HL-1260 service manual Side Cover R, Changeover guide, jam remove cover

1.5.2Changeover guide, jam remove cover

(1)Open the jam remove cover by hooking your finger on 2 dents ( A ).

(2)Remove the jam remove cover with its center part opened by bending the arm of the boss both on sides ( B ) toward the front ( C ).

(3)Remove the changeover guide from the boss by bending the right hook (viewed from the rear) of the rear cover ( D ), then remove the changeover guide ( E ).

Hole

Boss

Rear cover assy

D

E

Changeover guide

B

A

C

Jam remove cover

Dents

Figure 4.7

1.6Side Cover R

(1)Remove the side cover R by releasing the 4 hooks.

Rear

Side cover R

Hook at 4 places

Note: Before releasing the 4 hooks, remove the paper tray.

Front

Figure 4.8

IV - 5