Brother HL-1260 service manual Paper Feed Chassis Unit

1.12Paper Feed Chassis Unit

(1)Pull out the unit by loosening the 8 screws (4 screws for front and 4 screws for bottom).

Paper feed chassis unit

Screws

Screws

Note: When installing the paper feed chassis unit, screw the left chassis of this paper feed chassis unit,

set the paper tray, displace the right chassis of this unit up to the paper tray and screw them.

(2)Remove the paper hold front and paper hold rear by pinching the pawl of the paper hold front with pliers.

Paper hold front

Pliers

Screws Screws

Paper hold rear

Figure 4.21

(3)Release the left cartridge hold roller and remove the cartridge guide L (by loosening the screw and releasing the hook) then pull out feed flat cable 20P.

Cartridge hold roller

Feed flat cable 20P Hook (the rear side)

Cartridge guide L Screw

Figure 4.22

IV - 10